Measured value position
Stroke range 2520…5000 mm (in 20 mm steps)
Output
Signal characteristic analog output restricted by noise or A/D converter of control unit
Voltage 0.5…9.5 VDC
Current 4…20 mA
Resolution 2520…3500 mm ? 0.5 mm 3520…5000 mm ? 1.0 mm
Power up time typ. 250 ms
Mounting zone 30 mm
Damping 63.5 mm
69.5 mm (M6 female) / 85.5 mm (M8 male)
Accuracy
Linearity 2520…3500 mm ? ±1.0 mm
3520…5000 mm ? ±2.0 mm
Hysteresis 2520…3500 mm ? ±0.5 mm
3520…5000 mm ? ±1.0 mm
Internal sample rate 2 ms
Setpoint tolerance ?1 mm
Operating conditions
Mounting position any
Operating temperature electronics ?40…+105 °C
Storage temperature ?25…+ 65 °C
Fluid temperature ?30…+ 85 °C
Dew point, humidity EN60068-2-30, 90 % rel. humidity, no condensation
Pressure without considering support tube assembly
Operating pressure ratings pressure impulse test according DIN EN ISO 19879 (Ø 10 mm pressure pipe)
PN 320 bar
Pmax 400 bar
Pstatic 550 bar
IP rating
M12 connector EN60529 (IP69K) when plugged
Sensor housing EN60529 (IP67)
Environmental testing
Shock test IEC 60068-2-27, 50 g (11 ms) single shock, 15 g (11 ms) at 1000 shocks per axis
Vibration test IEC 60068-2-64, 5 g (r.m.s.) Ø 10 mm pressure pipe (10…2000 Hz) - resonance frequencies excluded
EMC test ISO 14982 Agricultural and forest machines
Immunity: ISO 11452-2 (200 V/m Antenna), ISO 11452-4 (200 mA BCI)
Emissions: CISPR 25
Transiente Impulses: ISO 7637-1/2
E.S.D.: ISO/TR 10605
Materials and dimensions
Pressure pipe (Ø 10 mm) stainless steel 1.4306 / AISI 304L
Housing stainless steel 1.4305 / AISI 303
Sealing O-ring 40.87 × 3.53 mm NBR 80, back-up ring 42.6 × 48 × 1.4 PTFE
Support tube stainless steel 1.4301 / AISI 304
Support tube adapter (head/tail) stainless steel 1.4305 / AISI 303
M12 connector insert material: polyamide reinforces; O-ring 7 × 1.35 mm NBR 70; pins: brass with gold plated pins
M12 flange brass nickel-plated with O-ring 13 × 1.6 NBR 70
Electrical installation
Connector M12 male plug
Supply voltage 12 VDC (tolerance range 8…32 VDC) 24 VDC (tolerance range 8…32 VDC)
Current consumption typ. < 100 mA typ. < 50 mA
Load (output VDC) RL> 10 k? RL> 10 k?
Load current (output VDC) typ. 1 mA typ. 1 mA
Loud (output mA) RL < 250 ? RL < 500 ?
Inrush current max. 2.5 A/2 ms max. 4.5 A/2 ms
Supply voltage ripple < 1 % p-p
Power drain < 1 W
Over voltage protection (GND-VDC) up to +36 VDC
Polarity protection (GND-VDC) up to ?36 VDC
Insulation Resistance R ? 10 M? @ 60 sec
Electric strength 500 VDC (DC GND to chassis GND)
