Mts Sensor RHM0600MH021A01

Input

Measured value Position, velocity / Option: Multi-magnet measurement (max. 4 positions simultaneous)

Stroke length Profile: 25…5000 mm / Rod: 25…7600 mm

Output

Interface Ethernet POWERLINK Standardization Group (ESPG)

Data protocol POWERLINK V2 according to IEEE 802.3

Accuracy

Resolution - Displacement up to 1 µm

Update time 1.0 ms up 2400 mm / 2.0 ms up 4800 mm / 4.0 ms up 7600 mm stroke length

Linearity 1 < ± 0.01 % F.S. (Minimum ± 40 µm)

Repeatability < ± 0.001 % F.S. (Minimum ± 2.5 µm)

Temperature coefficient < 15 ppm/°C

Hysteresis < 4 µm

Operating conditions

Magnet movement velocity any

Operating temperature 0…+70 °C

Dew point, humidity 90 % rel. humidity, no condensation

Ingress protection 2 Profile: IP65 / Rod: IP67

Shock test 100 g (single shock), IEC-Standard 6008-2-27

Vibration test 15 g / 10…2000 Hz, IEC-Standard 6008-2-6 (resonance frequencies excluded)

EMC test

Electromagnetic emission EN 61000-6-4 (for use in industrial environment)

Electromagnetic susceptibility EN 61000-6-2

The sensor meets the requirements of the EC directives and is marked with CE

Design/Material

Diagnostic display LEDs beside connector

Profile model:

Sensor electronics housing aluminum

Sensor profile aluminum

Rod model:

Sensor electronics housing aluminum

Rod with flange stainless steel 1.4301 / AISI 304

Installation

Mounting position any

Profile moveable mounting clamps or T-slot nuts M5 in base channel

Rod threaded flange M18×1.5 or ¾"-16 UNF-3A, Hex nut M18

Electrical connection

Connection type 4 pin connector M12-DF, 4 pin connector M8

Operating voltage 3 24 VDC (?15 / +20 %)

Polarity protection up to ?30 VDC

Overvoltage protection up to 36 VDC

Current drain 110 mA typical

Ripple (power supply) < 0.28 Vpp

Dielectric strength 500 VDC (DC ground to machine ground)