4-20mA Absolute vibration transmitter IP65 SS316 body with onboard 2 pin connector for machinery online monitoringThe integrated vibration transmitter TR-26 measures the absolute vibrations of any rotating machine support
The transmitter, secured directly on machinery, generates an electric signal (4÷20 mA) which is proportional respectively to vibration velocity or acceleration.
The transmitter is made of an AISI 316L body with machine connection thread; the connection to the acquisition system is effected by means of a MIL-C-5015-2 poles connector.
NOTE: The transmitter is available in different configuration versions and does not need any set-up or maintenance.
TR-26 monitors vibration of the point where fixed and interfaces directly to PLC/DCS 2 wires current loop. It is available with different certifications:
Intrinsecally safe Atex,TP TC, IECEx.CSA/UL HazLoc
The transmitter is certificate SIL 2 for functional safety
CompositionAISI 316L stainless steel bodyPower supply24 Vdc (10 ÷ 35 Vdc) current loop 4 ÷ 20 mA (2 wires)External connectionsMIL-C-5015 2 poles connector (conductors max section 2,5 mm²)4 poles M12 connectorEnvironmental- 60°C ÷ + 120°CIP 65 EN 60529/10.91 standardsMeasure typeOmnidirectional seismic (absolute vibration)Dynamic field± 18 gTransverse sensitivity< 5 %Linearity± 2% - 75 HzDynamic performances±3% / 10Hz – 1kHz - see Figure 2-3db / 1.5Hz – 2.5kHzInsulation?108 ? between signal and containerApplication axisAnyStandard machine connection threadM8x1,25¼”-18NPT¼’’-28UNFM6x1MaintenanceNo maintenance is neededElectrical connectionsBipolar shielded cable, conductors typical section 2x1mm²Parameters to be defined when orderingMeasuring field - Machine connection thread - Certification - ConnectionMounting torque5÷10 N-mCertification availableEx II 2 G Ex ia IIC T6, T5, T4 Gb (ATEX) - Ex ia IIC T6, T5, T4 Gb (IECEx)
